Whirlpool ovens are built with sophisticated technology to ensure consistent performance, but like all appliances, they can encounter issues. Error codes on Whirlpool ovens are designed to help you quickly identify and troubleshoot problems. This guide provides a detailed breakdown of all possible Whirlpool oven error codes, helping you diagnose and resolve any issues efficiently.
Whirlpool Oven error codes
| Error Code | Meaning | Cause | Possible Fix |
|---|---|---|---|
| F9 / F9 E0 | Electrical issue | Miswired electrical outlet or connection, power line “noise,” pressing keys too soon after power-up | Check wiring, allow oven to reset after power outage, avoid pressing buttons during power-up |
| C | Oven set to Celsius instead of Fahrenheit | Temperature display is in Celsius | Change setting from Celsius to Fahrenheit in the Owner’s Manual |
| CAL | Oven calibration feature | Oven temperature calibration needed | Calibrate the oven following the Owner’s Manual instructions |
| LOC / Lock / Locked | Control Lock activated | Control Lock feature is engaged | Deactivate Control Lock by holding the specified button as per the Owner’s Manual |
| SAB / Sab / 5AB / 5A6 | Sabbath Mode activated | Sabbath Mode is turned on | Turn off Sabbath Mode by following the Owner’s Manual instructions |
| PF / PF id=27 / PF id=30 | Power failure | Oven’s power supply was interrupted | Press “Cancel” to clear the display and reset the clock if necessary |
| Blank Clock | Clock display hidden | Feature allowing clock display to be hidden | Hold the “Clock Set/Start” button for 5 seconds to make the clock reappear |
| Time of Day Flashing | Power failure detected | Recent power failure | Press “Cancel” and reset the clock |
| F1 | Electronic control board issue | Control board malfunction or faulty temperature sensor | Inspect and replace the control board or temperature sensor |
| F2 | Oven overheating | Faulty temperature sensor or blocked airflow | Check for blockages and replace the temperature sensor |
| F3 | Temperature sensor issue | Shorted or disconnected temperature sensor | Reconnect or replace the temperature sensor |
| F5 | Door latch malfunction | Door latch problem during self-cleaning cycle | Inspect and replace the door latch |
| F7 | Keypad or control board malfunction | Stuck buttons or faulty control board | Check for stuck buttons and replace the control board if necessary |
Understanding Whirlpool Oven Error Codes
Whirlpool ovens are equipped with a range of error codes that alert users to specific malfunctions. These codes can indicate anything from power issues to temperature calibration errors. Below is a detailed explanation of each code and how to address the problems they represent.
F9 / F9 E0 Error Code
The F9 or F9 E0 error code signals an electrical problem, often related to miswiring or power fluctuations.
Causes:
- Miswiring of the electrical outlet or the oven’s connection.
- Power line “noise” during an outage, which can cause incorrect voltage detection.
- Pressing keys too soon after powering up (within the first 10 seconds).
Troubleshooting Steps:
- If the oven was recently installed, contact a qualified electrician to check the wiring.
- After a power outage, allow the oven to reset by turning it off for a few minutes, then turn it back on.
- Ensure that no buttons are pressed during the first 10 seconds after turning on the oven.
C Error Code
The C error code appears when the oven is set to display temperatures in Celsius rather than Fahrenheit.
Causes:
- Oven temperature is set to Celsius instead of Fahrenheit.
Troubleshooting Steps:
- Refer to your Owner’s Manual to change the display setting from Celsius to Fahrenheit.
- Remember that the oven won’t heat above 260°C if Celsius mode is active.
CAL Error Code
The CAL code refers to the oven’s calibration feature, allowing you to adjust temperature settings if the oven is cooking too hot or too cold.
Causes:
- The oven’s calibration function has been accessed.
Troubleshooting Steps:
- Follow the instructions in your Owner’s Manual to adjust the calibration and correct temperature discrepancies.
LOC, Lock, Locked Error Code
The LOC, Lock, or Locked code indicates that the Control Lock feature has been activated, preventing accidental changes to settings.
Causes:
- The Control Lock feature is engaged.
Troubleshooting Steps:
- To deactivate the Control Lock, refer to your Owner’s Manual. Usually, holding a specific button (such as the “Start” or “Control Lock” button) for a few seconds will resolve this issue.
SAB, Sab, 5AB, 5A6 Error Codes
These codes indicate that the oven’s Sabbath Mode is active. Sabbath Mode modifies how the oven operates to comply with certain religious practices.
Causes:
- Sabbath Mode is turned on, restricting some oven functions.
Troubleshooting Steps:
- Refer to the Owner’s Manual for instructions on turning Sabbath Mode on and off.
PF, PF id=27, PF id=30 Error Codes
The PF, PF id=27, or PF id=30 codes appear after a power failure, indicating that the oven’s power supply was interrupted.
Causes:
- A power failure or disruption in the electrical supply.
Troubleshooting Steps:
- Press the “Cancel” button to clear the display.
- On some models, the clock may need to be reset. Refer to your Owner’s Manual for specific instructions on setting the time.
Clock is Blank
If the clock on your Whirlpool oven goes blank, this may not be an error. Some models allow you to hide the clock display as a feature.
Causes:
- The oven’s hidden clock feature is activated.
Troubleshooting Steps:
- Press and hold the “Clock Set/Start” button for five seconds to make the clock reappear.
- If the time disappeared after a power failure, reset the clock according to the instructions in your Owner’s Manual.
Time of Day is Flashing
If the time of day is flashing on your oven, it typically indicates a power failure.
Causes:
- A recent power failure has occurred.
Troubleshooting Steps:
- Press the “Cancel” button to stop the flashing.
- Reset the time of day following the steps in your Owner’s Manual.
Additional Whirlpool Oven Error Codes
F1 Error Code
The F1 code indicates an issue with the electronic control board or temperature sensor.
Causes:
- Malfunction in the control board or a faulty temperature sensor.
Troubleshooting:
- Inspect and replace the temperature sensor or control board if necessary.
F2 Error Code
The F2 code shows that the oven has overheated, possibly due to a faulty temperature sensor or blocked ventilation.
Causes:
- Overheating detected.
- Faulty temperature sensor.
Troubleshooting:
- Ensure the temperature sensor is connected properly and isn’t damaged.
- Check for blockages in the oven’s airflow.
F3 Error Code
The F3 error indicates a temperature sensor issue, often caused by a short or disconnection.
Causes:
- Faulty or disconnected temperature sensor.
Troubleshooting:
- Replace the temperature sensor if it’s damaged.
F5 Error Code
The F5 error code suggests a problem with the oven door latch, often occurring during the self-cleaning cycle.
Causes:
- The door latch is malfunctioning or stuck.
Troubleshooting:
- Inspect the door latch for any issues and replace it if necessary.
F7 Error Code
The F7 code relates to a keypad or control board malfunction, commonly due to stuck buttons.
Causes:
- Faulty keypad or control board.
Troubleshooting:
- Check for stuck or unresponsive buttons.
- Reset the oven, and if the problem persists, replace the control board.
F9 Error Code (Other Variants)
There are additional variants of the F9 error code, all related to issues with the oven’s door lock, particularly during self-cleaning cycles.
Causes:
- Door latch not engaging or disengaging properly.
Troubleshooting:
- Check the door latch mechanism for blockages or damage.
- Ensure the door is closing and locking correctly during self-cleaning cycles.
General Troubleshooting Tips for Whirlpool Oven Error Codes
- Reset the Oven: Unplugging the oven for a few minutes often resets the control board, clearing many error codes.
- Consult the Manual: Always refer to the Owner’s Manual for model-specific troubleshooting steps.
- Call a Technician: If basic troubleshooting fails, contact a qualified technician for a deeper diagnosis.
Preventing Whirlpool Oven Error Codes
- Regular Cleaning and Maintenance: Keep the oven, control panel, and temperature sensors clean and free from grease to prevent malfunctions.
- Use a Surge Protector: Protect your oven’s control board from electrical surges by using a surge protector.
- Follow Usage Guidelines: Avoid using the self-cleaning cycle too frequently, as it can put stress on the oven’s components.
Conclusion
Whirlpool oven error codes are designed to give you insight into issues with your appliance, allowing you to troubleshoot problems efficiently. From minor settings adjustments like changing Celsius to Fahrenheit, to more complex issues like a malfunctioning control board, this guide provides you with the knowledge to resolve most error codes. Always refer to your Owner’s Manual for model-specific information, and don’t hesitate to contact a professional if necessary.