If you’re encountering error codes on your Miele dryer, this guide will provide comprehensive explanations for each error and troubleshooting steps to resolve them. Miele dryers are sophisticated appliances designed to detect and display a wide range of error codes, helping users identify specific problems. Below, we’ll explore all possible error codes across Miele dryer models and provide solutions to keep your dryer running smoothly.
Miele Dryer Error Codes
| Error Code | Meaning | Cause | Possible Fix |
|---|---|---|---|
| 0 and Finish Displayed / Anti-crease/Finish Illuminated | Drying cycle complete | The drying cycle has finished. | Check laundry, unload, or start a new cycle if needed. |
| 3 LEDs Light Up or Flash | General fault indicator | An error has been detected in the system. | Restart the dryer. If persistent, consult a technician. |
| 888 on the Display | Diagnostic or standby mode | Dryer is in a special mode or error. | Restart the dryer. If unresolved, contact support. |
| ADD on the Display | Allows more laundry to be added | Option to pause and add more clothes. | Pause, add laundry, and resume the cycle. |
| Bars === … -== …== … -= … on the Display | Cycle progress indicators | Indicates the stage of the drying cycle. | No action required. |
| Clean Door Filter Keeps Appearing | Lint filter needs cleaning | Airflow is restricted by lint buildup. | Clean the lint filter after each drying cycle. |
| Clean Out Airways Indicator Light Comes On | Blocked airways | Vents or ducts are obstructed. | Clean airways and ensure proper airflow. |
| Clicking Noises from Tumble Dryer | Foreign objects or drum issues | Something stuck in the drum or mechanical fault. | Check for foreign objects, if none, consult a technician. |
| Cold Air or Finish Flashes | Cooling phase of the cycle | The dryer is in cool down mode. | No action required unless laundry is damp. |
| Ctrl on the Display | Control lock activated | Child lock or control lock is enabled. | Deactivate the lock as per the user manual. |
| Dashes — on Display | Standby mode | Awaiting user input. | Select a drying program and start the cycle. |
| Display Dark and Start/Stop Flashes | Energy-saving mode or internal error | Dryer has powered down for efficiency. | Press any button or restart the dryer. |
| Display Has Stripes/Streaks | Display fault | Electrical or moisture issue affecting display. | Restart the dryer, if unresolved, consult a technician. |
| Display Texts in Another Language | Incorrect language setting | Language accidentally changed. | Navigate to settings and select the correct language. |
| Drying Indicator Light Flashes | Drying cycle in progress | Dryer is running a cycle. | No action required unless flashing persists after cycle ends. |
| Empty Out Container Indicator Light Comes On | Water container full | The water container needs to be emptied. | Empty the container and reinsert it properly. |
| Fault F1, F2, F3, F4 | System faults | Various internal sensor or component errors. | Restart the dryer, contact support if persistent. |
| Fault F30 | Heating system fault | Problem with the heating element. | Clean filters, check airflow, consult a technician. |
| Fault F36, F38, F39 | Motor or fan fault | Issues with drum movement or fan. | Check for obstructions, contact support if unresolved. |
| Fault F40, F41, F43 | Control board or electrical fault | Electrical or board issue detected. | Restart dryer, call a technician if the error persists. |
| Fault F45, F46 | Temperature sensor fault | Issues with temperature regulation. | Clean airways and filters, contact support if needed. |
| Fault F50, F53 | Load imbalance or drum issue | Uneven load or drum movement issue. | Redistribute load, restart dryer. |
| Fault F55, F66, F99 | Communication error | Problem with internal component communication. | Restart the dryer, contact a technician. |
| Fault F104, F108 | Fan or heating element fault | Failure in fan or heating system. | Clean vents, check the fan, call for service if unresolved. |
| Fault F156, F157, F158, F159 | Critical system faults | Serious internal error detected. | Contact Miele support immediately. |
| Fault F206, F207, F242 | Component failure | Failure in electronic circuits or sensors. | Professional service required. |
| Information Clean Out Airways/End of Programme | End of cycle but airways need cleaning | Cycle finished, but airflow is restricted. | Clean airways before the next cycle. |
| Laundry Damp and Clean Out Airways Lights Up | Incomplete drying due to restricted airflow | Airways blocked or incorrect program used. | Clean airways, check load and program. |
| Locked Indicator Light Comes On or Flashes | Control panel locked | Child lock or control lock is active. | Follow user manual to unlock the panel. |
| noC on the Display | No program selected | Dryer is awaiting a program selection. | Select a program to continue. |
| Red Lamp Indicator Light Lights Up | Maintenance required | A maintenance issue has been detected. | Contact Miele for service. |
| Rolling Bars on the Display | Cycle in progress | The drying program is running. | No action required, this is normal. |
| Start/Stop Indicator Light Flashes | Cycle paused | The dryer has been paused or is awaiting input. | Press start to resume the cycle. |
| Technical Fault | System error | Dryer has encountered a technical issue. | Restart the dryer, contact support if unresolved. |
| Time Left Freezes on 6 or 11 | Program malfunction | Issue with the program timer. | Restart the dryer, or select a different program. |
| Time Left Stops at 10 | Cycle cooling down | Dryer is in a cool-down phase. | No action required, wait for the cycle to end. |
General Display Messages and Indicators
0 and Finish Displayed / Anti-crease/Finish Illuminated
When the display shows “0” along with the Finish indicator or the Anti-crease/Finish light is illuminated, it means that the drying cycle is complete. This is a normal operational message.
- Troubleshooting: If your laundry is still damp, ensure you’ve selected the correct drying program and that the load size is appropriate for the program. Check if the dryer is overloaded, which may prevent complete drying.
3 LEDs Light Up or Flash
This is a general fault indicator signaling that the dryer has detected an error that needs attention.
- Troubleshooting: Try turning the dryer off, waiting a few minutes, and then restarting it. If the error persists, consult a technician.
888 on the Display
When the dryer displays “888,” it is likely in a diagnostic or standby mode.
- Troubleshooting: Turn the dryer off, then restart it to return to normal operation. If “888” continues to appear, this may indicate an internal error that needs professional service.
ADD on the Display
This indicator allows you to pause the cycle and add more laundry to the dryer.
- Troubleshooting: Simply open the door, add the additional laundry, and resume the drying cycle.
Bars === … -== …== … -= … on the Display
These bars represent different stages of the drying cycle. They are an indicator of cycle progress.
- Troubleshooting: This is part of normal dryer operation, and no action is required.
Common Maintenance and Indicator Light Errors
Clean Door Filter Keeps Appearing
This error means that the lint filter needs to be cleaned to maintain proper airflow.
- Troubleshooting: Remove the lint filter, clean it thoroughly, and ensure no lint remains in the filter housing. It’s recommended to clean the lint filter after every drying cycle to avoid airflow issues.
Clean Out Airways Indicator Light Comes On
This error points to a blocked airway, which reduces the dryer’s efficiency.
- Troubleshooting: Check the airways, including vents and ducts, for blockages. Clean them out to restore airflow. If the issue persists, consider having a professional inspect the system.
Clicking Noises from the Tumble Dryer
While some clicking noises are normal, consistent or loud clicks may indicate a problem.
- Troubleshooting: Inspect the drum for foreign objects like coins or buttons. If no objects are found and the noise persists, there may be a mechanical issue requiring service.
Cold Air or Finish Flashes
This indicates the dryer has entered the cool-down phase, signaling the end of the drying cycle.
- Troubleshooting: This is a normal part of the cycle, and no action is needed unless the laundry remains damp. In that case, check the load size and drying program.
Ctrl on the Display
This indicates the control lock or child lock is activated.
- Troubleshooting: To deactivate the lock, follow the instructions in the user manual, usually by pressing and holding a combination of buttons for a few seconds.
Dashes — on Display
This means the dryer is in standby mode, awaiting user input.
- Troubleshooting: Press the Start/Stop button or select a program to continue using the dryer.
Display and Indicator Malfunctions
Display Dark and Start/Stop Flashes
This could mean the dryer has gone into energy-saving mode or an internal error has been detected.
- Troubleshooting: Press any button to wake the display. If this doesn’t work, try restarting the dryer. If the issue persists, a technical fault may have occurred.
Display Has Stripes/Streaks
Stripes or streaks on the display can indicate a display fault, possibly due to moisture or an electrical issue.
- Troubleshooting: Restart the dryer and let it dry out in a well-ventilated area. If the problem continues, contact Miele support for further assistance.
Display Texts in Another Language
Sometimes, the display language may accidentally change.
- Troubleshooting: Navigate to the settings menu and select the correct language. Refer to your user manual for instructions.
Drying Indicator Light Flashes
This shows that a drying cycle is currently in progress.
- Troubleshooting: This is normal unless the light continues flashing after the cycle should have ended. In such cases, check for an error in the program or load.
Empty Out Container Indicator Light Comes On
This indicates that the water container for a condenser dryer needs to be emptied.
- Troubleshooting: Empty the water container, and ensure it is properly reinserted before continuing.
Fault Codes and Their Meanings
Fault F1, F2, F3, F4
These codes indicate generic system faults involving various sensors or internal components.
- Troubleshooting: Turn off the dryer, wait a few minutes, and turn it back on. If the problem persists, contact Miele support for further diagnosis.
Fault F30
This code indicates an issue with the dryer’s heating system, typically involving a malfunction of the heating element.
- Troubleshooting: Clean the airways and filters. If the problem continues, a technician will need to inspect the heating element.
Fault F36, F38, F39
These errors typically relate to motor or fan malfunctions.
- Troubleshooting: Ensure no obstructions are blocking the drum or fan. If the error persists, the motor may require professional repair.
Fault F40, F41, F43
These codes signal issues with the control board or electrical components.
- Troubleshooting: Turn off the appliance, wait a few minutes, and turn it back on. If this does not resolve the issue, professional service is required.
Fault F45, F46
These codes relate to temperature sensor malfunctions.
- Troubleshooting: Ensure airways are clear and the lint filter is clean. If the error continues, contact Miele for support.
Fault F50, F53
These codes indicate an imbalance in the load or issues with drum movement.
- Troubleshooting: Rearrange the laundry to ensure an even load. If this does not solve the issue, restart the dryer. Persistent errors may require motor or sensor inspection.
Fault F55, F66, F99
These codes signal communication errors between internal components, which may be due to faulty wiring or a control board failure.
- Troubleshooting: Restart the dryer. If the error persists, contact a technician to diagnose and repair the fault.
Fault F104, F108
These errors point to issues with the fan or heating element failure.
- Troubleshooting: Clean all airways and check the fan for obstructions. If this doesn’t resolve the issue, a technician will need to inspect the dryer.
Fault F156, F157, F158, F159
These codes indicate severe system faults that require professional attention.
- Troubleshooting: Contact Miele for support, as these errors typically involve critical system failures.
Fault F206, F207, F242
Critical component failures, often involving electronic circuits or sensors.
- Troubleshooting: Immediate service by a Miele technician is required for these faults.
Other Display and Operational Issues
Information Clean Out Airways/End of Programme
This message means the program is complete, but airways need cleaning for optimal performance.
- Troubleshooting: Clean the airways and vents before starting the next drying cycle.
Laundry Damp and Clean Out Airways Lights Up
This indicates the drying cycle was incomplete, and the airways are obstructed.
- Troubleshooting: Clear the airways, check the drying program, and ensure the dryer is not overloaded.
Locked Indicator Light Comes On or Flashes
The dryer’s control panel is locked, likely due to the child lock feature.
- Troubleshooting: Refer to the user manual to unlock the control panel.
noC on the Display
This message means no program has been selected.
- Troubleshooting: Choose a drying program and press Start to begin the cycle.
Red Lamp Indicator Light Lights Up
This error suggests a general maintenance issue that requires attention.
- Troubleshooting: Contact Miele for further guidance on resolving the issue.
Rolling Bars on the Display
The rolling bars indicate cycle progress.
- Troubleshooting: This is normal operation and doesn’t require any action.
Start/Stop Indicator Light Flashes
This signals the dryer has been paused.
- Troubleshooting: Press the Start/Stop button to resume or restart the cycle.
Technical Fault
A technical fault is a serious error that requires immediate attention.
- Troubleshooting: Turn off the dryer and contact a professional for repair.
Time Left Freezes on 6 or 11
If the time left on the display freezes at 6 or 11 minutes, there may be a problem with load detection or sensors.
- Troubleshooting: Restart the dryer, check the load, and ensure the sensors are working correctly.
Time Left Stops at 10
This error could indicate sensor malfunction or a program interruption.
- Troubleshooting: Restart the dryer and ensure the load is properly balanced.
Conclusion
Miele dryers are equipped with advanced diagnostic features that display error codes to alert you to potential problems. By understanding and troubleshooting these codes, you can resolve many common issues and keep your dryer running efficiently.