Maytag Oven Error Codes: A Complete Troubleshooting Guide

Modern Maytag ovens are equipped with smart technology that provides error codes to diagnose issues when something goes wrong. These codes help homeowners troubleshoot and resolve problems quickly. This guide will walk you through all the possible error codes for Maytag ovens, their meanings, causes, and solutions, making it your one-stop solution for resolving Maytag oven issues.

Maytag Oven Error Codes

Common Maytag Oven Error Codes and Solutions

F9 or F9 E0 Error Code

Meaning: The electrical outlet or connection to the appliance may be miswired.

Cause:

• The appliance may have been miswired during installation.
• Power supply “noise” during a power outage may be detected as incorrect voltage.
• Pressing any key within 10 seconds of powering up may trigger the error.

Solution:

• Contact a qualified electrician to verify the electrical connection if the oven was installed recently.
• Reset the power by turning off the circuit breaker for one minute and turning it back on.
• Avoid pressing buttons during the initial power-up phase.

“C” Error Code

Meaning: The oven is displaying the temperature in Celsius rather than Fahrenheit.

Cause:

• The oven has been set to Celsius mode, which limits the temperature to 260 degrees.

Solution:

• Refer to the Owner’s Manual to switch the temperature unit back to Fahrenheit.

Clock is Blank

Meaning: The time of day is hidden from the display window.

Cause:

• Certain Maytag models allow you to hide the clock as a hidden feature.

Solution:

• Press and hold the “Clock Set/Start” button for five seconds to restore the clock display without resetting the time.

“CAL” Error Code

Meaning: The oven’s calibration feature has been activated.

Cause:

• The oven requires calibration to adjust its temperature settings.

Solution:

• Follow the calibration instructions provided in the Owner’s Manual to ensure accurate temperature control.

LOC, Lock, Locked Error Code

Meaning: The Control Lock feature has been activated, locking the oven’s controls.

Cause:

• The Control Lock was engaged either intentionally or accidentally.

Solution:

• Refer to the Owner’s Manual to deactivate the Control Lock and regain control of the oven.

SAB, Sab, 5AB, or 5A6 Error Code

Meaning: The Sabbath Mode feature is activated, limiting the oven’s operations.

Cause:

• Sabbath Mode was enabled, restricting certain oven functions to meet religious observance requirements.

Solution:

• Follow the Owner’s Manual to exit Sabbath Mode and restore full functionality.

PF or PF id=27 or PF id=30 Error Code

Meaning: There has been a power failure.

Cause:

• The oven detected a power outage, causing it to lose its current settings.

Solution:

• Press the Cancel button to clear the display and restore operation.
• On some models, you may need to reset the time of day clock.

Time of Day Flashing

Meaning: The clock is flashing the time.

Cause:

• This occurs when the oven detects a power outage or interruption.

Solution:

• Press the Cancel button to stop the flashing and reset the clock to the correct time, if necessary.

Resetting the Power to Your Maytag Oven

When to Reset the Power

Sometimes, error codes can be resolved by resetting the power to the unit. This is especially effective for electrical-related error codes like F9 or PF.

Steps to Reset the Oven

1. Turn off the circuit breaker or unplug the unit for one minute.
2. Turn the power back on by resetting the circuit breaker or plugging the oven back in.
3. Wait for one minute and monitor the oven to see if the error code reappears.

Resetting the power helps reboot the control system, potentially clearing out any persistent error codes caused by power fluctuations.

Additional Maytag Oven Error Codes

F1 Error Code

Meaning: There is a failure in the electronic oven control.

Cause:

• A malfunction in the oven control board.

Solution:

• The control board may need to be replaced to resolve the issue.

F2 Error Code

Meaning: The oven temperature is too high.

Cause:

• The temperature sensor may be malfunctioning, causing the oven to overheat.

Solution:

• Check the oven’s temperature sensor and replace it if necessary.

F3 Error Code

Meaning: Temperature sensor failure.

Cause:

• The oven’s temperature sensor is faulty.

Solution:

• Replace the temperature sensor to resolve this error.

F5 Error Code

Meaning: There is an issue with the oven door lock mechanism.

Cause:

• The door lock assembly may be broken or malfunctioning.

Solution:

• Repair or replace the door lock assembly to resolve the issue.

F8 Error Code

Meaning: Meat probe malfunction.

Cause:

• The meat probe is faulty or improperly connected.

Solution:

• Disconnect and reconnect the probe or replace it if necessary.

When to Contact a Professional

While many error codes can be resolved by following the troubleshooting steps above, some issues may require professional assistance.

• Unresolved Error Codes: If the error persists after troubleshooting, it’s time to call a professional.
• Electrical Issues: Any code related to electrical miswiring (such as F9) should be handled by a licensed electrician.
• Overheating or Gas Issues: Errors like F2, which indicate temperature problems, should be addressed by a technician to ensure safety.

Conclusion

Understanding Maytag oven error codes allows you to troubleshoot and fix common problems without the need for costly repairs. For issues that cannot be resolved by resetting the power or following the Owner’s Manual, it’s best to seek help from a professional technician or contact Maytag’s customer support.