Understanding error codes on your GE washing machine is crucial for effective troubleshooting and maintenance. This article serves as a one-stop solution, detailing all possible error codes across GE washing machine models. Whether you’re facing issues with your washer or just want to be prepared, you’ll find all the information you need here.
GE Washing Machine Error Codes
| Error Code | Meaning | Cause | Possible Fix |
|---|---|---|---|
| E22 | No Fill or Slow Fill | Water supply valves may be closed or malfunctioning; fill lines could be frozen; siphon issue in the drain system. |
Ensure water supply valves are fully open; check fill lines for freezing; inspect drain system. |
| E23 | Washer Overfilled with Water | Faulty water level sensor or control board malfunction. | Inspect and replace the water level sensor; check control board. |
| E30 | No Drain | Clogged drain hose or filter; malfunctioning drain pump. | Clear any blockages in the drain hose or filter; test and replace drain pump. |
| E31 | Draining Timed Out | Blocked drain hose; malfunctioning drain pump. | Check and clear blockages; test drain pump for functionality. |
| E38 | Dispenser Error | Clogged dispenser or faulty dispenser motor. | Clean dispenser; inspect and replace dispenser motor if defective. |
| E39 | Dispenser Won’t Move | Mechanical obstruction or faulty dispenser control board. | Inspect for blockages; test and replace control board. |
| E42 or E45 | Drive Motor Drawing Too Much Current | Motor wear and tear; blockages in the drum. | Check for mechanical issues; clear blockages; replace drive motor if necessary. |
| E43 | Inverter Control Board Defective | Electrical faults or damage to the board. | Inspect and replace the inverter control board. |
| E46 | Drive Motor Overheating | Extended usage or mechanical issues. | Allow motor to cool down; inspect for blockages. |
| E47 | Inverter Control Board is Overheating | Electrical overloads or environmental factors. | Allow control board to cool down; check for short circuits. |
| E48 | Drive Motor Defective (Open Winding) | Internal damage to the motor windings. | Test motor continuity; replace motor if open winding is detected. |
| E49 | Drive Motor Overloaded | Excessive laundry load or mechanical issues. | Reduce laundry load; inspect for resistance. |
| E57 or E58 | Main Control Board Failure | Electrical faults or software malfunctions. | Inspect wiring; replace control board if necessary. |
| E60, E61, E63 or E64 | Door Lock Assembly Failure | Faulty door lock assembly. | Inspect and replace door lock assembly if defective. |
| E65 | Water Level Sensor Failure | Faulty sensor or wiring issues. | Test and replace water level sensor if necessary. |
| E66 or E67 | Water Temperature Sensor is Defective | Electrical or sensor malfunctions. | Inspect and replace temperature sensor if defective. |
| E70 | Stuck Key on the Control Panel | Dirt or debris obstructing keys; faulty control panel. | Clean control panel; replace if faulty. |
| E71 | Defective Main Control Board | Electrical faults or manufacturing defects. | Inspect and replace main control board if necessary. |
| 1 Flash | Motor Failure | Problem with the motor. | Unplug the washer and replace the drive motor. |
| 2 Flashes | Slipping Drive Belt or Loose Hub Nut | Issues with drive belt or hub nut. | Inspect and tighten hub nut or replace drive belt. |
| 3 Flashes | Defective Inverter Control | Problem with the inverter control. | Test and replace the inverter control if defective. |
| 4 Flashes | Mode Shifter Circuit Failed | Failure in the mode shifter circuit. | Inspect and replace the mode shifter circuit if necessary. |
| 5 Flashes | Motor Failure | Persistent motor failure. | Unplug the washer and replace the drive motor. |
| 6 Flashes | Locked Rotor on the Drive Motor | Rotor is locked. | Inspect for mechanical obstructions and clear them. |
| 7 Flashes | Lid Didn’t Open for 4 Consecutive Cycles | Lid did not open as expected. | Inspect and replace lid switch if defective. |
| 8 Flashes | Motor Overheated | Motor has overheated. | Allow motor to cool down; check for blockages. |
| 9 Flashes | Motor Brake Mechanism is Defective | Problem with the motor brake mechanism. | Inspect and replace motor brake mechanism if defective. |
Understanding GE Washing Machine Error Codes
Error codes are alphanumeric indicators that help identify specific issues within the washing machine. These codes appear on the display screen when the machine encounters a problem, allowing you to take corrective actions. Recognizing these codes can save you time, money, and stress by enabling you to troubleshoot effectively.
Common GE Washing Machine Error Codes
E22: No Fill or Slow Fill
Description: Indicates that the washer is either not filling with water or filling very slowly.
Causes:
- Water supply valves may be closed or malfunctioning.
- Fill lines could be frozen, especially in winter.
- There may be a siphon issue in the drain system.
Solutions:
- Ensure that both water supply valves behind the washer are fully open.
- Check fill lines for freezing and thaw if necessary.
- Inspect the drain system for siphoning issues.
E23: Washer Overfilled with Water
Description: This code signals that the washer has filled beyond its capacity.
Causes:
- A faulty water level sensor may be the culprit.
- The control board could also be malfunctioning.
Solutions:
- Inspect the water level sensor and replace it if defective.
- Check the control board for faults and replace as needed.
E30: No Drain
Description: Indicates that the washing machine cannot drain water.
Causes:
- The drain hose or filter might be clogged.
- There could be a malfunctioning drain pump.
Solutions:
- Inspect and clear any blockages in the drain hose or filter.
- Test the drain pump and replace it if necessary.
E31: Draining Timed Out
Description: This code appears when the draining process takes longer than expected.
Causes:
- Blocked drain hose.
- A malfunctioning drain pump.
Solutions:
- Check for and clear any blockages in the drain system.
- Test the drain pump for functionality and replace if required.
E38: Dispenser Error
Description: Indicates a problem with the detergent dispenser.
Causes:
- The dispenser may be clogged.
- The dispenser motor could be faulty.
Solutions:
- Clean the dispenser to remove any clogs.
- Inspect and replace the dispenser motor if defective.
E39: Dispenser Won’t Move
Description: This error signals that the dispenser mechanism is not functioning.
Causes:
- Mechanical obstruction could be blocking movement.
- The dispenser control board may be faulty.
Solutions:
- Inspect for any mechanical blockages and remove them.
- Test and replace the control board if necessary.
E42 or E45: Drive Motor Drawing Too Much Current
Description: Indicates an excessive current draw from the drive motor.
Causes:
- Motor wear and tear.
- Blockages in the drum.
Solutions:
- Check for mechanical issues with the drum and clear any blockages.
- Replace the drive motor if necessary.
E43: Inverter Control Board Defective
Description: This code indicates a problem with the inverter control board.
Causes:
- Electrical faults or damage to the board.
Solutions:
- Inspect the inverter control board and replace it if defective.
E46: Drive Motor Overheating
Description: Signals that the drive motor is overheating.
Causes:
- Extended usage or mechanical issues may cause overheating.
Solutions:
- Allow the motor to cool down.
- Inspect for blockages and mechanical wear.
E47: Inverter Control Board is Overheating
Description: This error signifies that the inverter control board is overheating.
Causes:
- Electrical overloads or environmental factors may lead to overheating.
Solutions:
- Allow the control board to cool down and check for any short circuits.
E48: Drive Motor Defective (Open Winding)
Description: Indicates an issue with the drive motor.
Causes:
- Internal damage to the motor windings.
Solutions:
- Test motor continuity and replace it if open winding is detected.
E49: Drive Motor Overloaded
Description: This code appears when the drive motor is overloaded.
Causes:
- An excessive laundry load or mechanical issues may lead to overload.
Solutions:
- Reduce the laundry load and inspect for any mechanical resistance.
E57 or E58: Main Control Board Failure
Description: Indicates a failure of the main control board.
Causes:
- Electrical faults or software malfunctions.
Solutions:
- Inspect the wiring and replace the control board if necessary.
E60, E61, E63 or E64: Door Lock Assembly Failure
Description: Signals a problem with the door locking mechanism.
Causes:
- A faulty door lock assembly may be the cause.
Solutions:
- Inspect and replace the door lock assembly if defective.
E65: Water Level Sensor Failure
Description: Indicates a failure of the water level sensor.
Causes:
- Faulty sensor or wiring issues.
Solutions:
- Test and replace the water level sensor if necessary.
E66 or E67: Water Temperature Sensor is Defective
Description: This code indicates that the water temperature sensor is not functioning properly.
Causes:
- Electrical or sensor malfunctions may occur.
Solutions:
- Inspect and replace the temperature sensor if defective.
E70: Stuck Key on the Control Panel
Description: This error signifies that a key on the control panel is stuck.
Causes:
- Dirt or debris may be obstructing the keys.
- A faulty control panel may also be responsible.
Solutions:
- Clean the control panel and check for any obstructions.
- Replace the control panel if it is faulty.
E71: Defective Main Control Board
Description: Indicates that the main control board is defective.
Causes:
- Electrical faults or manufacturing defects could cause this issue.
Solutions:
- Inspect and replace the main control board if necessary.
Flash Code Error Indicators
Flash codes are additional indicators that can help diagnose issues with your GE washing machine. Each flash pattern corresponds to a specific problem.
1 Flash: Motor Failure
Description: Indicates a problem with the motor.
Solutions:
- Unplug the washer and replace the drive motor.
2 Flashes: Slipping Drive Belt or Loose Hub Nut on the Spin Basket
Description: Indicates issues with the drive belt or hub nut.
Solutions:
- Inspect and tighten the hub nut or replace the drive belt if worn.
3 Flashes: Defective Inverter Control
Description: Indicates a problem with the inverter control.
Solutions:
- Test and replace the inverter control if defective.
4 Flashes: Mode Shifter Circuit Failed
Description: This error signals a failure in the mode shifter circuit.
Solutions:
- Inspect and replace the mode shifter circuit if necessary.
5 Flashes: Motor Failure
Description: Indicates persistent motor failure.
Solutions:
- Unplug the washer and replace the drive motor.
6 Flashes: Locked Rotor on the Drive Motor
Description: Indicates that the rotor is locked.
Solutions:
- Inspect for mechanical obstructions and clear them.
7 Flashes: Lid Didn’t Open for 4 Consecutive Cycles
Description: This error signals that the lid did not open as expected.
Solutions:
- Inspect and replace the lid switch if it is defective.
8 Flashes: Motor Overheated
Description: Indicates that the motor has overheated.
Solutions:
- Allow the motor to cool down and check for blockages.
9 Flashes: Motor Brake Mechanism is Defective
Description: Indicates a problem with the motor brake mechanism.
Solutions:
- Inspect and replace the motor brake mechanism if defective.
Conclusion
Understanding error codes is essential for maintaining your GE washing machine and ensuring it operates efficiently. By recognizing these codes and following the recommended troubleshooting steps, you can save time and money on repairs.