Understanding error codes in your Whirlpool dryer is crucial for effective troubleshooting and maintenance. This article serves as a one-stop solution for all possible error codes across Whirlpool Dryer models, ensuring you have the information needed to diagnose issues and maintain optimal performance.

Whirlpool Dryer Error Codes

Error Code Meaning Cause Possible Fix
F01 Control Board Failure Malfunction in the control board. Check power supply and connections; replace the control board if needed.
F02 Door Switch Failure Door switch is not detecting if the door is closed. Test door switch; replace if faulty.
F03 Temperature Sensor Failure Issues with the temperature sensor regulating heat. Check sensor continuity; replace if damaged.
F05 Heating Element Failure Heating element is not generating heat. Inspect for damage; test for continuity and replace if necessary.
F06 Temperature Limit Switch Failure The switch preventing overheating is malfunctioning. Test for continuity; replace if faulty.
F07 Motor Speed Sensor Failure Motor speed sensor is not functioning properly. Check wiring; test sensor resistance and replace if needed.
F08 Heating Element Relay Failure Failure in the relay controlling the heating element. Check relay continuity; replace if necessary.
F09 Internal Communication Failure Communication error between dryer components. Inspect wiring; reset the dryer and check connections.
F11 Control Panel Failure Issue with the control panel. Check for damage; test components and replace if needed.
F12 Unspecified Error A generic error indicating malfunction. Power cycle the dryer; refer to the manual for guidance.
F13 Drum Sensor Failure Drum sensor not detecting drum movement. Inspect sensor and wiring; replace if needed.
F15 Low Voltage Insufficient voltage reaching the dryer. Check power supply and circuit; consult an electrician if necessary.
F16 Communication Error Errors in communication between components. Inspect wiring; reset control board for diagnostics.
F18 Control Board Communication Failure Failure in communication with the control board. Check connections and short circuits; consider replacing the board.
F19 Sensor Malfunction Faulty sensor affecting dryer operation. Test sensors for functionality; replace any faulty sensors.

Common Whirlpool Dryer Error Codes

Error codes help identify specific problems within your dryer, allowing for timely repairs and preventing further damage. Below is a detailed overview of each error code and what you can do to resolve the issues.

F01: Control Board Failure

Description: Indicates a malfunction in the control board, which manages dryer functions.

Symptoms: The dryer may not start, and the control panel may appear unresponsive.

Troubleshooting Steps:

  • Check the power supply and ensure the dryer is plugged in.
  • Inspect wiring and connections to the control board.
  • If issues persist, consider replacing the control board.

F02: Door Switch Failure

Description: The door switch detects whether the dryer door is closed.

Symptoms: The dryer fails to start with the door closed.

Troubleshooting Steps:

  • Test the door switch using a multimeter for continuity.
  • Inspect the door latch and alignment.
  • Replace the switch if it is faulty.

F03: Temperature Sensor Failure

Description: Indicates an issue with the temperature sensor, which regulates the drying temperature.

Symptoms: Inconsistent drying or the dryer may overheat.

Troubleshooting Steps:

  • Check the sensor for continuity.
  • Examine wiring for damage.
  • Replace the sensor if it fails testing.

F05: Heating Element Failure

Description: The heating element is responsible for generating heat.

Symptoms: The dryer runs but does not produce heat.

Troubleshooting Steps:

  • Inspect the heating element for visible damage.
  • Test for continuity with a multimeter.
  • Replace the heating element if necessary.

F06: Temperature Limit Switch Failure

Description: This switch prevents the dryer from overheating.

Symptoms: The dryer may overheat or not operate correctly.

Troubleshooting Steps:

  • Test the limit switch for continuity.
  • Inspect for lint blockages.
  • Replace the switch if it is defective.

F07: Motor Speed Sensor Failure

Description: Indicates a malfunction in the motor speed sensor.

Symptoms: The dryer drum may not spin.

Troubleshooting Steps:

  • Check wiring to the motor and sensor.
  • Test the motor speed sensor’s resistance.
  • Replace the sensor if necessary.

F08: Heating Element Relay Failure

Description: Indicates a failure in the relay controlling the heating element.

Symptoms: The dryer may not heat up.

Troubleshooting Steps:

  • Check the relay for continuity.
  • Inspect electrical connections for damage.
  • Replace the relay if faulty.

F09: Internal Communication Failure

Description: Indicates a communication error between components.

Symptoms: Multiple error codes may be displayed.

Troubleshooting Steps:

  • Inspect all wiring connections.
  • Reset the dryer.
  • If problems continue, consider replacing the control board.

F11: Control Panel Failure

Description: Indicates an issue with the control panel.

Symptoms: Controls may be unresponsive or erratic.

Troubleshooting Steps:

  • Check for physical damage or loose connections.
  • Test components with a multimeter.
  • Replace the control panel if necessary.

F12: Unspecified Error

Description: A generic error indicating a malfunction.

Symptoms: General signs of malfunction may occur.

Troubleshooting Steps:

  • Power cycle the dryer.
  • Check for any additional error codes.
  • Refer to the user manual for specific guidance.

F13: Drum Sensor Failure

Description: Indicates a problem with the drum sensor, which detects drum movement.

Symptoms: The dryer drum may not turn.

Troubleshooting Steps:

  • Inspect the drum sensor and wiring for damage.
  • Test for continuity.
  • Replace the sensor if it fails.

F15: Low Voltage

Description: Indicates that the dryer is receiving insufficient voltage.

Symptoms: The dryer may not start or may run inconsistently.

Troubleshooting Steps:

  • Check the power supply and circuit breaker.
  • Inspect the power cord and outlet for issues.
  • If necessary, consult an electrician.

F16: Communication Error

Description: Indicates communication issues between dryer components.

Symptoms: The dryer may operate intermittently.

Troubleshooting Steps:

  • Check wiring and connectors for damage.
  • Reset the control board.
  • Further diagnostics may be needed.

F18: Control Board Communication Failure

Description: Indicates communication issues specifically with the control board.

Symptoms: The control panel may not respond.

Troubleshooting Steps:

  • Inspect connections to the control board.
  • Check for short circuits.
  • Replace the control board if necessary.

F19: Sensor Malfunction

Description: Indicates that one or more sensors are not functioning correctly.

Symptoms: The dryer may not operate as expected.

Troubleshooting Steps:

  • Test all sensors for functionality.
  • Inspect wiring and connectors.
  • Replace any faulty sensors.

LED Indicators

LED indicators provide visual cues regarding the dryer’s operational status. Here’s what each LED signifies:

LED1: Power Indicator

Description: Shows whether the dryer is powered on.

Troubleshooting: If LED1 is not lit, check the power supply and circuit breaker.

LED2: Drying Cycle Indicator

Description: Indicates the status of the drying cycle.

Troubleshooting: If LED2 is blinking or off, ensure the cycle is set correctly and check for any error codes.

LED3: Error Code Indicator

Description: Illuminates when an error code is present.

Troubleshooting: If LED3 is continuously lit, note the error code displayed for further diagnosis.

LED4: Sensor Status Indicator

Description: Indicates the status of the sensors.

Troubleshooting: If LED4 is unresponsive, check sensor connections and functionality.

LED5: Completion Indicator

Description: Signals when a drying cycle is complete.

Troubleshooting: If LED5 does not light up after the cycle, inspect for issues with the control panel or wiring.

Reset Function

The reset function can help clear error codes and restore normal operation. Here’s how to reset your Whirlpool dryer:

  • Step 1: Unplug the dryer from the power source.
  • Step 2: Wait for about one minute.
  • Step 3: Plug the dryer back in.
  • Step 4: Turn the dryer on and select a cycle to check if the error codes persist.

General Troubleshooting Tips

When addressing error codes and LED indicators, consider the following general troubleshooting tips:

  • Always ensure safety precautions are taken when working with electrical appliances.
  • Regularly clean lint filters and vents to prevent overheating.
  • Keep an eye on the power supply and circuit breaker to avoid voltage issues.

When to Call a Professional

If you encounter repeated error codes or if your dryer shows signs of physical damage, it may be time to call a professional. Additionally, if you are uncomfortable performing repairs, seeking professional assistance is advisable.

Conclusion

Understanding and addressing error codes in your Whirlpool dryer can save you time and money on repairs. By familiarizing yourself with these codes and their meanings, you can maintain your dryer’s performance and troubleshoot issues effectively.